Use two TCP/IP addresses
In this scenario, your machine uses two TCP/IP addresses, and has two machine names. Sendmail will run on one TCP/IP address, and receive mail there. Lyris List Manager will run on
the other TCP/IP address and receive mail there. Each TCP/IP address should resolve to a different DNS host name, so that people can send email to either address by using the appropriate host name.
The advantage of this approach is that it is very straightforward to set up and does not cause any dependency between Sendmail and Lyris List Manager. Thus, it is also very reliable.
For example, if your machine is named "apollo.mycorp.com" and has the TCP/IP address "207.105.6.10", you might also assign your machine the TCP/IP address "207.105.6.11" which resolves to
"juno.mycorp.com". Sendmail would be told to use the "apollo" address, and Lyris List Manager could use the "juno" address. To the outside world, it will appear that your network has two machines,
"apollo" and "juno", when actually they are one machine, with two TCP/IP addresses.
The first step in implementing this method is to obtain, from your network administrator, a second TCP/IP address, and to make sure that a separate host name is assigned in the DNS for it.
Adding a TCP/IP address on Solaris
Once this is done, you can add this TCP/IP address to your Solaris system with a command such as this:
ifconfig le0:1 207.105.6.11 up
In this example, the Ethernet adapter "le0" has been assigned a second address (with the ":1") of "207.105.6.11", and is now up. You might want to add this command to a startup
file, such as /etc/rc2.d/S72inetsvc so that this command executes automatically at system startup.
Adding a TCP/IP address on Irix
As of Irix 6.2, you can add a TCP/IP address using the "alias" option of the "ifconfig" command. The "man ifconfig" documentation page explains it this way:
ifconfig interface alias addr
Establish an additional network address for this interface. This can be useful in permitting a single physical interface to accept packets addressed to several different addresses such as when you
are changing network numbers and you wish to accept packets addressed to the old interface. Another case is when you'd like to have multiple addresses assigned to a single network interface. The
broadcast and netmask options can also be used in conjunction with the alias option. When using aliases you may have to change the configuration of routed, especially if aliases are on different
networks than the primary address. Aliases are added as host entries in the routing tables for routed. See routed(1M) for more information on this.
Adding a TCP/IP address on Digital Unix
Digital Unix supports multiple TCP/IP addresses using the "alias" option of the "ifconfig" command. Consult the documentation page for "man ifconfig" for more information.
After you have added a TCP/IP address
The next step is to configure Sendmail to use only one TCP/IP address. If you do not do this, Sendmail will automatically use all the TCP/IP addresses on your machine and none will be available for
Lyris List Manager.
To restrict sendmail to one TCP/IP address, add the following line to your /etc/mail/sendmail.cf file:
Substituting your 1st TCP/IP address for 207.105.6.11. This Sendmail option is explained in the "Options" chapter of the O'Reilly Sendmail book.
You will now need to restart Sendmail. Be sure to telnet to port 25 on each TCP/IP address to ensure that Sendmail is using the correct TCP/IP address.
apollo# telnet 207.105.6.10 25
Trying 207.105.6.10...
Connected to 207.105.6.10.
Escape character is '^]'.
220 apollo.mycorp.com
ESMTP Sendmail 8.8.5/8.8.5; Mon, 16 Jun 1997
apollo# telnet 207.105.6.11 25
Trying 207.105.6.11...
telnet: Unable to connect to remote host:
Connection refused
You should now go ahead and install Lyris List Manager. Once Lyris List Manager is installed, you will need to tell Lyris List Manager to use the 2nd TCP/IP address. The
installation program will give this option, or you can do this with the "tcpip" command line parameter. For example:
lyris tcpip 207.105.6.11 127.0.0.1
The "127.0.0.1" is added so that you can connect to Lyris List Manager from your own machine. By default, the web interface uses 127.0.0.1 to connect to the Lyris List Manager. If
you do not specify 127.0.0.1 as a TCP/IP address you will need to edit your "lyris.plc" config file to point to the address.
You are now ready to use Lyris List Manager! You can start Lyris List Manager in the foreground with the command "lyris start" or in the background with "lyris -bd". The first time, we recommend
that you run Lyris List Manager in the foreground, so that any error messages are immediately displayed. If you would like complete debugging information, add the "debug" parameter when you run
Lyris List Manager, as in: "lyris start debug"
|