Moving ListManager: Linux/Solaris

1. Shut down ListManager on the old machine.

2. You need to know the name of this ListManager machine as it is configured in your database.

1. Open the file ~/ListManager/bin/lmcfg.txt using a plain-text editor such as vi.

2. Note the value of $node_name.

3. Start the installer ListManager on the new machine. On Unix cd to the lm/bin directory, and run from the command prompt:

 ./install_lm.pl

4. Select "Add Node".

5. When prompted for the node name, use the name of your previous ListManager machine.

6. Proceed with the installation as prompted.

7. Shut down ListManager if you started it after the installation.

8. Open a command prompt, and change to the ListManager directory. Run the following commands to retrieve the activation code for the new machine:

lm clearactivation

lm getactivation

9. Start ListManager and the ListManager web server.

10. Depending on your settings for your previous installation, the ListManager web server may not be able to communicate with ListManager on localhost (127.0.0.1), preventing it from running. If running ListManager from the command prompt, you will see a message like this one:

Error: unable to listen to: TCP/IP address: 192.168.0.5, port number: 2021

If this is the case for your installation, we recommend you contact Lyris tech support for assistance with the following steps:

1. Open the file ~listmanager/tclweb/bin/tclhttpd.rc with a plain-text editor such as Notepad or vi.

2. Note the IP address being used in Config ipaddr.

3. Using the client tools for your database, open a connection to it.

4. Run the following update command, substituting the IP address in tclhttpd.rc for the IP address below:

update lyrConfigNodeSettings
set TclPortBindIp ="123.456.789.000"

5.   Start ListManager and the ListManager web server.

11. Log into the ListManager web interface as a server administrator.

12. Go to Utilities: Administration: Sites, and edit any sites you have, so that the Internet Host Name field for each site is the name of your new ListManager machine. Also assign the IP addresses ListManager should use for SMTP and NNTP on each site.

13. Go to Utilities: Administration: Server: Server Settings: Machine Settings: IP Addresses, and specify what IP addresses ListManager should bind to for DNS lookups.

You're done!