Installing the Web Interface on a Separate Machine

 

1. Run the ListManager installer on the machine you'd like to run the web interface.

 

2. Install ListManager. The installer will request database connectivity information, but you need not provide it. Once ListManager is installed, do not run lm.exe. You will only be running httpd-lm.exe on this machine.

 

3. Find the file ~tclweb/bin/tclhttpd.rc, and open it with a plain text editor.

 

4. Edit the Config tclport_ip to be the TCP/IP address of your original ListManager server. Also edit the Config tclport_port if you have changed it in Utilities: Administration: Server: Server Settings: Network Settings: Ports and Config tclport_password if you have changed it in Utilities: Administration: Server: Server Settings: Advanced: For Programmers.

 

5. Go to your original ListManager installation, and edit Utilities: Administration: Server: Server Settings: Security: GUI Hosts. Add the IP address of the remote web server to the IP addresses currently there.

 

6. Start the ListManager Web Server on the remote machine. You should now be able to access the ListManager web interface.

 

7. To make clickthroughs use the hostname you've configured for your remote server, configure it in URL to Web Interface in Utilities: Administration: Sites: Edit Site: Essentials.

 

Note that you must have port 2021 open between your original ListManager installation and your ListManager web server.

 

More

 

1. The ListManager Web Server

2. Starting and Stopping the ListManager Web Server

3. Installing the Web Interface on a Separate Machine

4. How To Install The Web Interface By Hand

5. Configuring the ListManager Web Server

6. Customizing the ListManager Web Interface

7. Adding SSL to the ListManager Web Server

8. Creating a Web Server for Action Tracking Only

 



Starting and Stopping the ListManager Web Server How To Install the Web Interface by Hand